IFC 4.3.2.20240128 (IFC4X3_ADD2) under development

4.1.7.1.12.1.1 Reference SweptSolid PolyCurve Geometry

The Reference SweptSolid PolyCurve Geometry is the reference representation of the 3D shape of a product by swept solid models, only allowing for the basic extruded area solids and revolved area solids. Being a reference representation it is normally not displayed and it is not used in a voiding relationship.

The following attribute values for the IfcShapeRepresentation holding this geometric representation shall be used:

The following diagram shows the generic classes and relationships used when applying this concept. In addition, concepts may have particular importance to common or standardised industry practices and scenarios. For these specific usage scenarios, the table below shows a recommended list of general usage patterns that users may adopt.

G IfcProduct IfcProduct 1. GlobalId [1:1] 2. OwnerHistory [0:1] 3. Name [0:1] 4. Description [0:1]      HasAssignments [0:?]      Nests [0:1]      IsNestedBy [0:?]      HasContext [0:1]      IsDecomposedBy [0:?]      Decomposes [0:1]      HasAssociations [0:?] 5. ObjectType [0:1]      IsDeclaredBy [0:1]      Declares [0:?]      IsTypedBy [0:1]      IsDefinedBy [0:?] 6. ObjectPlacement [0:1] 7. Representation [0:1]      ReferencedBy [0:?]      PositionedRelativeTo [0:?]      ReferencedInStructures [0:?] IfcProductDefinitionShape IfcProductDefinitionShape 1. Name [0:1] 2. Description [0:1] 3. Representations [1:?]      ShapeOfProduct [1:?]      HasShapeAspects [0:?] IfcProduct:Representation1->IfcProductDefinitionShape:IfcProductDefinitionShape0 IfcShapeRepresentation IfcShapeRepresentation 1. ContextOfItems [1:1] Identifier 2. RepresentationIdentifier [0:1] Type 3. RepresentationType [0:1] 4. Items [1:?]      RepresentationMap [0:1]      LayerAssignments [0:?]      OfProductRepresentation [0:?]      OfShapeAspect [0:1] IfcProductDefinitionShape:Representations1->IfcShapeRepresentation:IfcShapeRepresentation0 IfcGeometricRepresentationContext IfcGeometricRepresentationContext 1. ContextIdentifier [0:1] 2. ContextType [0:1]      RepresentationsInContext [0:?] 3. CoordinateSpaceDimension [1:1] 4. Precision [0:1] 5. WorldCoordinateSystem [1:1] 6. TrueNorth [0:1]      HasSubContexts [0:?]      HasCoordinateOperation [0:1] IfcShapeRepresentation:ContextOfItems1->IfcGeometricRepresentationContext:IfcGeometricRepresentationContext0 IfcLabel_0 IfcLabel IfcShapeRepresentation:RepresentationIdentifier1->IfcLabel_0:IfcLabel0 IfcLabel_1 IfcLabel IfcShapeRepresentation:RepresentationType1->IfcLabel_1:IfcLabel0 IfcSweptAreaSolid IfcSweptAreaSolid      LayerAssignment [0:1]      StyledByItem [0:1] 1. SweptArea [1:1] 2. Position [0:1] IfcShapeRepresentation:Items1->IfcSweptAreaSolid:IfcSweptAreaSolid0 constraint_0 =Reference IfcLabel_0->constraint_0 constraint_1 =SweptSolid IfcLabel_1->constraint_1 Extruded_Area_PolyCurve_Profile Extruded Area PolyCurve Profile IfcSweptAreaSolid->Extruded_Area_PolyCurve_Profile Revolved_Area_PolyCurve_Profile Revolved Area PolyCurve Profile IfcSweptAreaSolid->Revolved_Area_PolyCurve_Profile
Figure 4.1.7.1.12.1.1.A

General Usage

ApplicableEntity
IfcProduct
Table 4.1.7.1.12.1.1.B

Edit on Github


Is this page difficult to understand? Let us know!