6.2.4.16 Pset_DistributionPortTypeDuct
6.2.4.16.1 Semantic definition
Duct port occurrence attributes attached to an instance of IfcDistributionPort.
6.2.4.16.2 Applicable entities
- IfcDistributionPort/DUCT
6.2.4.16.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| ConnectionType | IfcPropertyEnumeratedValue | PEnum_DuctConnectionType |
The end-style treatment of the duct port: BEADEDSLEEVE: Beaded Sleeve. COMPRESSION: Compression. CRIMP: Crimp. DRAWBAND: Drawband. DRIVESLIP: Drive slip. FLANGED: Flanged. OUTSIDESLEEVE: Outside Sleeve. SLIPON: Slipon. SOLDERED: Soldered. SSLIP: S-Slip. STANDINGSEAM: Standing seam. SWEDGE: Swedge. WELDED: Welded. OTHER: Another type of end-style has been applied. NONE: No end-style has been applied. |
|
| ConnectionSubtype | IfcPropertySingleValue | IfcLabel |
The physical port connection subtype that further qualifies the ConnectionType. The following values are recommended:
|
|
| NominalWidth | IfcPropertySingleValue | IfcNonNegativeLengthMeasure |
The nominal overall width of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
|
| NominalHeight | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The nominal height of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. The nominal height of the duct connection. Only provided for rectangular shaped ducts. |
|
| NominalThickness | IfcPropertySingleValue | IfcNonNegativeLengthMeasure |
The nominal thickness of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
|
| DryBulbTemperature | IfcPropertyBoundedValue | IfcThermodynamicTemperatureMeasure |
Dry bulb temperature of the object. Indicates dry bulb temperature of the air. |
|
| WetBulbTemperature | IfcPropertyBoundedValue | IfcThermodynamicTemperatureMeasure |
Wet bulb temperature of the air. |
|
| VolumetricFlowRate | IfcPropertyBoundedValue | IfcVolumetricFlowRateMeasure |
The volumetric flow rate of the fluid. |
|
| Velocity | IfcPropertyBoundedValue | IfcLinearVelocityMeasure |
The velocity of the fluid. |
|
| Pressure | IfcPropertyBoundedValue | IfcPressureMeasure |
The pressure of fluid. |