IFC 4.3.0.1 (IFC4X3) development

7.6.4.6 Pset_InterceptorTypeCommon

7.6.4.6.1 Semantic definition

Common properties for interceptors.

7.6.4.6.2 Applicable entities

7.6.4.6.3 Properties

Name Property Type Data Type Description
Reference IfcPropertySingleValue IfcIdentifier

Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.

Status IfcPropertyEnumeratedValue PEnum_ElementStatus

Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).

NominalBodyLength IfcPropertySingleValue IfcPositiveLengthMeasure

Nominal or quoted length measured along the x-axis of the local coordinate system of the object.

NominalBodyWidth IfcPropertySingleValue IfcPositiveLengthMeasure

Nominal or quoted length, measured along the y-axis of the local coordinate system of the object.

NominalBodyDepth IfcPropertySingleValue IfcPositiveLengthMeasure

Nominal or quoted length measured along the z-axis of the local coordinate system of the object.

InletConnectionSize IfcPropertySingleValue IfcPositiveLengthMeasure

Size of the inlet connection. Note that all inlet connections are assumed to be the same size.

OutletConnectionSize IfcPropertySingleValue IfcPositiveLengthMeasure

Size of the outlet connection from the object.

CoverLength IfcPropertySingleValue IfcPositiveLengthMeasure

The length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the cover of the object.

CoverWidth IfcPropertySingleValue IfcPositiveLengthMeasure

The length measured along the y-axis in the local coordinate system of the cover of the object.

VentilatingPipeSize IfcPropertySingleValue IfcPositiveLengthMeasure

Size of the ventilating pipe(s).

Table 7.6.4.6.A

Edit on Github


Is this page difficult to understand? Let us know!

7.6.4.6.4 Changelog

  • New resource