IFC 4.3.2.20240128 (IFC4X3_ADD2) under development

7.8.4.86 Pset_MemberTypePost

7.8.4.86.1 Semantic definition

Properties of a post. A post is a linear (usually vertical) member used to support something or to mark a point.

7.8.4.86.2 Applicable entities

7.8.4.86.3 Properties

Name Property Type Data Type Description
NominalHeight IfcPropertySingleValue IfcNonNegativeLengthMeasure

The nominal height of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.

ConicityRatio IfcPropertySingleValue IfcRatioMeasure

The ratio of the diameter of the cone bottom surface to the height of the pole.

LoadBearingCapacity IfcPropertySingleValue IfcPlanarForceMeasure

Maximum load bearing capacity of the floor structure throughtout the storey as designed.

WindLoadRating IfcPropertySingleValue IfcLabel

Wind load resistance rating for this object. It is provided according to the national building code.

TorsionalStrength IfcPropertySingleValue IfcPressureMeasure

Shear strength in torsion.

BendingStrength IfcPropertySingleValue IfcPressureMeasure

Bending strength.

Table 7.8.4.86.A

Edit on Github


Is this page difficult to understand? Let us know!

7.8.4.86.4 Changelog

7.8.4.86.4.1 IFC4.3_DEV_70ee25e8

  • New resource