IFC 4.3.1.0 (IFC4X3_ADD1) development

7.11.4.9 Pset_ReinforcementBarPitchOfColumn

7.11.4.9.1 Semantic definition

The pitch length information of reinforcement bar with the column. The X and Y direction are based on the local coordinate system of building storey. The X and Y direction of the reinforcement bar are parallel to the X and Y axis of the IfcBuildingStorey's local coordinate system, respectively.

7.11.4.9.2 Applicable entities

7.11.4.9.3 Properties

Name Property Type Data Type Description
Description IfcPropertySingleValue IfcText

The Description of the object.

Reference IfcPropertySingleValue IfcLabel

Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.

ReinforcementBarType IfcPropertyEnumeratedValue PEnum_ReinforcementBarType

Defines the type of the reinforcement bar.

HoopBarPitch IfcPropertySingleValue IfcPositiveLengthMeasure

The pitch length of the hoop bar.

XDirectionTieHoopBarPitch IfcPropertySingleValue IfcPositiveLengthMeasure

The X direction pitch length of the tie hoop.

XDirectionTieHoopCount IfcPropertySingleValue IfcCountMeasure

The number of bars with X direction tie hoop bars.

YDirectionTieHoopBarPitch IfcPropertySingleValue IfcPositiveLengthMeasure

The Y direction pitch length of the tie hoop.

YDirectionTieHoopCount IfcPropertySingleValue IfcCountMeasure

The number of bars with Y direction tie hoop bars.

Table 7.11.4.9.A

Edit on Github


Is this page difficult to understand? Let us know!

7.11.4.9.4 Changelog

7.11.4.9.4.1 IFC4.3_DEV_9f90c1f0