IFC 4.3.1.0 (IFC4X3_ADD1) development

Type1

Semantic definition

Type of weld seam according to ISO 2553. Note, combined welds are given by two corresponding symbols in the direction of the normal axis of the coordinate system. For example, an X weld is specified by Type1 = 'V' and Type2 = 'V'.

Referenced in
Pset_FastenerWeld
Table 2cd63cdb-c48f-4a40-9f4f-2dbfc10cdef6

Edit on Github


Is this page difficult to understand? Let us know!