IFC 4.3.2.20240809 (IFC4X3_ADD2) under development

StructuralSlope

Semantic definition

The nominal side slope (allowable steepness) of the pavement structure (not including side slope fill) as a positive ratio measure. The slope information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters take precedence. Value is typically less than 1.0 (1:1) but may be greater than that for steeper slopes.

Referenced in
Pset_PavementCommon
Table A

Edit on Github


Is this page difficult to understand? Let us know!