IFC (IFC4X3_ADD1) development Pset_DistributionPortTypePipe Semantic definition

Pipe port occurrence attributes attached to an instance of IfcDistributionPort. Applicable entities Properties

Name Property Type Data Type Description
ConnectionType IfcPropertyEnumeratedValue PEnum_PipeEndStyleTreatment

The end-style treatment of the duct port:

BEADEDSLEEVE: Beaded Sleeve. COMPRESSION: Compression. CRIMP: Crimp. DRAWBAND: Drawband. DRIVESLIP: Drive slip. FLANGED: Flanged. OUTSIDESLEEVE: Outside Sleeve. SLIPON: Slipon. SOLDERED: Soldered. SSLIP: S-Slip. STANDINGSEAM: Standing seam. SWEDGE: Swedge. WELDED: Welded. OTHER: Another type of end-style has been applied. NONE: No end-style has been applied.

ConnectionSubtype IfcPropertySingleValue IfcLabel

The physical port connection subtype that further qualifies the ConnectionType. The following values are recommended:

  • ACPLUG: A, B, C, D, E, F, EF, G, H, I, J, K, L, M
  • DIN: Mini3P, Mini4P, Mini5P, Mini6P, Mini7P, Mini8P, Mini9P
  • DSub: DA15, DB25, DC37, DD50, DE9, DE15
  • EIAJ: RC5720
  • HDMI: A, B, C
  • RADIO: IEEE802.11g, IEEE802.11n
  • RJ: 4P4C, 6P2C, 8P8C
  • SOCKET: E-11, E-12, E-14, E-17, E-26, E-27, E-39, E-40
  • TRS: TS_Mini, TS_SubMini, TRS_Mini, TRS_SubMini
NominalDiameter IfcPropertySingleValue IfcPositiveLengthMeasure

Nominal diameter or width of the object.

The nominal diameter of the pipe connection.

InnerDiameter IfcPropertySingleValue IfcPositiveLengthMeasure

The actual inner diameter of the object.

OuterDiameter IfcPropertySingleValue IfcPositiveLengthMeasure

The actual outer diameter of the object.

Temperature IfcPropertyBoundedValue IfcThermodynamicTemperatureMeasure

Temperature of the fluid.

VolumetricFlowRate IfcPropertyBoundedValue IfcVolumetricFlowRateMeasure

The volumetric flow rate of the fluid.

MassFlowRate IfcPropertyBoundedValue IfcMassFlowRateMeasure

The mass flow rate of the fluid.

FlowCondition IfcPropertyBoundedValue IfcPositiveRatioMeasure

Defines the flow condition as a percentage of the cross-sectional area.

Velocity IfcPropertyBoundedValue IfcLinearVelocityMeasure

The velocity of the fluid.

Pressure IfcPropertyBoundedValue IfcPressureMeasure

The pressure of fluid.


Edit on Github

Is this page difficult to understand? Let us know! Changelog IFC4

  • New resource IFC4.3_DEV_d297a43

  • property, ConnectionSubtype
  • property, ConnectionSubType