IFC 4.3.2.20240904 (IFC4X3_ADD2) under development

7.1.4.2 Pset_DoorPanelProperties

7.1.4.2.1 Semantic definition

Properties of the door panel.

7.1.4.2.2 Applicable entities

7.1.4.2.3 Properties

Name Property Type Data Type Description
PanelDepth IfcPropertySingleValue IfcPositiveLengthMeasure

Depth of the panel.

For a door, it is the depth of the door panel, measured perpendicular to the plane of the door leaf.

PanelOperation IfcPropertyEnumeratedValue PEnum_DoorPanelOperationEnum

The way of operation of a panel.

For a door, it is the way of operation of the panel. The PanelOperation of the door panel shall correspond to the OperationType of the IfcDoorType by which it is referenced.

PanelWidth IfcPropertySingleValue IfcNormalisedRatioMeasure

Width of the panel.

For a door, it is the width of the panel, given as ratio relative to the total clear opening width of the door. If omitted, it defaults to 1. A value shall be provided for all doors with OperationType's at IfcDoorType defining a door with more then one panel.

PanelPosition IfcPropertyEnumeratedValue PEnum_DoorPanelPositionEnum

Position of the panel.

For a door, it is the position of the panel within the door. The PanelPosition of the door panel shall correspond to the OperationType of the IfcDoorType by which it is referenced.

Table 7.1.4.2.A

Edit on Github


Is this page difficult to understand? Let us know!

7.1.4.2.4 Changelog

7.1.4.2.4.1 IFC4.3_DEV_c85b862

  • New resource