IFC 4.3.2.20240904 (IFC4X3_ADD2) under development

7.2.4.2 Pset_ActuatorTypeCommon

7.2.4.2.1 Semantic definition

Actuator type common attributes.

7.2.4.2.2 Applicable entities

7.2.4.2.3 Properties

Name Property Type Data Type Description
Reference IfcPropertySingleValue IfcIdentifier

Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used.

ActuatorStatus IfcPropertyEnumeratedValue PEnum_ElementStatus

Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure).

FailPosition IfcPropertyEnumeratedValue PEnum_FailPosition

Specifies the required fail-safe position of the actuator.

ManualOverride IfcPropertySingleValue IfcBoolean

Identifies whether hand-operated operation is provided as an override (= TRUE) or not (= FALSE). Note that this value should be set to FALSE by default in the case of a Hand Operated Actuator.

ActuatorApplication IfcPropertyEnumeratedValue PEnum_ActuatorApplication

Indicates application of actuator.

Table 7.2.4.2.A

Edit on Github


Is this page difficult to understand? Let us know!

7.2.4.2.4 Changelog

7.2.4.2.4.1 IFC4

7.2.4.2.4.2 IFC4.1

7.2.4.2.4.3 IFC4.2

7.2.4.2.4.4 IFC4.3_DEV_20bdb3d

  • applicability, IfcActuatorType
  • property, ActuatorApplication
  • property, ActuatorStatus
  • property, Application
  • property, Status