IFC 4.3.2.20240809 (IFC4X3_ADD2) under development

7.1.4.1 Pset_DoorLiningProperties

7.1.4.1.1 Semantic definition

Properties of the door lining.

7.1.4.1.2 Applicable entities

7.1.4.1.3 Properties

Name Property Type Data Type Description
LiningDepth IfcPropertySingleValue IfcPositiveLengthMeasure

The depth of the lining.

For a door, it is the depth of the door lining, measured perpendicular to the plane of the door lining. If omitted (and with a given value to lining thickness) it indicates an adjustable depth (i.e. a depth that adjusts to the thickness of the wall into which the occurrence of this door style is inserted).

LiningThickness IfcPropertySingleValue IfcNonNegativeLengthMeasure

Thickness of the lining.

For a door, it is the thickness of the door lining as explained in the figure above. If LiningThickness value is 0. (zero) it denotes a door without a lining (all other lining parameters shall be set to NIL in this case). If the LiningThickness is NIL it denotes that the value is not available.

ThresholdDepth IfcPropertySingleValue IfcPositiveLengthMeasure

Depth (dimension in plane perpendicular to door leaf) of the door threshold. Only given if the door lining includes a threshold. If omitted (and with a given value to threshold thickness) it indicates an adjustable depth (i.e. a depth that adjusts to the thickness of the wall into which the occurrence of this door style is inserted).

ThresholdThickness IfcPropertySingleValue IfcNonNegativeLengthMeasure

Thickness of the door threshold as explained in the figure above. If ThresholdThickness value is 0. (zero) it denotes a door without a threshold (ThresholdDepth shall be set to NIL in this case). If the ThresholdThickness is NIL it denotes that the information about a threshold is not available.

TransomThickness IfcPropertySingleValue IfcNonNegativeLengthMeasure

Thickness of the transom.

For a door, it is the thickness (width in plane parallel to door leaf) of the transom (if provided - that is, if the TransomOffset attribute is set), which divides the door leaf from a glazing (or window) above. If the TransomThickness is set to zero (and the TransomOffset set to a positive length), then the door is divided vertically into a leaf and transom window area without a physical frame.

TransomOffset IfcPropertySingleValue IfcLengthMeasure

Offset of the transom (if given) which divides the door leaf from a glazing (or window) above. The offset is given from the bottom of the door opening.

LiningOffset IfcPropertySingleValue IfcLengthMeasure

Offset of the lining.

For a door, it is the offset (dimension in plane perpendicular to door leaf) of the door lining. The offset is given as distance to the x axis of the local placement.

ThresholdOffset IfcPropertySingleValue IfcLengthMeasure

Offset (dimension in plane perpendicular to door leaf) of the door threshold. The offset is given as distance to the x axis of the local placement. Only given if the door lining includes a threshold and the parameter is known.

CasingThickness IfcPropertySingleValue IfcPositiveLengthMeasure

Thickness of the casing.

For a door, it is the dimension in plane of the door leaf. If given it is applied equally to all four sides of the adjacent wall.

CasingDepth IfcPropertySingleValue IfcPositiveLengthMeasure

Depth of the casing.

For a door, it is the dimension in the plane perpendicular to door leaf. If given it is applied equally to all four sides of the adjacent wall.

LiningToPanelOffsetX IfcPropertySingleValue IfcLengthMeasure

Offset between the lining and the panel, measured along the x-axis of the local placement.

For a door, it is the offset between the lining and the window panel.

LiningToPanelOffsetY IfcPropertySingleValue IfcLengthMeasure

Offset between the lining and the panel, measured along the y-axis of the local placement.

For a door, it is the offset between the lining and the door panel.

Table 7.1.4.1.A

Edit on Github


Is this page difficult to understand? Let us know!

7.1.4.1.4 Changelog

7.1.4.1.4.1 IFC4.3_DEV_20bdb3d

  • New resource