7.5.4.79 Pset_PipeSegmentTypeCommon
7.5.4.79.1 Semantic definition
Pipe segment type common attributes.
7.5.4.79.2 Applicable entities
7.5.4.79.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| Reference | IfcPropertySingleValue | IfcIdentifier |
Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types and no classification reference to a recognized classification system used. |
|
| Status | IfcPropertyEnumeratedValue | PEnum_ElementStatus |
Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
|
| WorkingPressure | IfcPropertySingleValue | IfcPressureMeasure |
Working pressure. |
|
| PressureRange | IfcPropertyBoundedValue | IfcPressureMeasure |
Allowable maximum and minimum working pressure (relative to ambient pressure). |
|
| TemperatureRange | IfcPropertyBoundedValue | IfcThermodynamicTemperatureMeasure |
Allowable maximum and minimum temperature. |
|
| NominalDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Nominal diameter or width of the object. |
|
| InnerDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The actual inner diameter of the object. |
|
| OuterDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The actual outer diameter of the object. |
|
| Length | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The length of the object. |